• Service hotline:0769-82961190

  • CHEN

4News Center -> FAQ
Location: Home ->  News Center ->  FAQ
2023
-
07
-
08
Plastic molds have become the most widely used information in various fields. The mold has always served the mall with an excellent reputation. Its quality is primarily reflected in six aspects. The following is a specific and comprehensive introduction. Click to check for comments. Service life: the number of Cyclic number of operation that can be completed or the number of parts produced by the mold on the premise of ensuring product quality.
2023
-
07
-
08
Mold injection molding is a processing method used for mass production of certain disorderly shaped parts. The specific principle is to push the heated and melted plastic raw material into the cavity of the plastic mold under high pressure using the screw of the injection molding machine, cool and solidify to obtain the plastic molding product. The plastic mold consists of a movable mold and a fixed mold.
2023
-
07
-
08
There are ten, hundreds and thousands of people in the Injection mold construction factory. Some environments are good, some environments are normal, and some environments are poor. Will harsh environments affect product quality? The answer is certain. The author starts from the mold room of the Injection mold construction factory.
2023
-
07
-
08
Classification requirements and various precautions during processing in plastic mold factories 1. There are many types of plastic molds, which can be roughly divided into ten categories. Select different types of molds for forming based on different requirements such as part material, physical and chemical properties, mechanical strength, dimensional accuracy, surface finish, service life, and economy.
2023
-
07
-
08
Definition of Injection mold construction: the tool that plastic is injected into non-standard tools through the injection molding machine and cooled to form is called a mold. There are various problems in the design of precision Injection mold construction. The following are solutions for various problems:
2023
-
07
-
08
Is it possible to use the same material for the outer shell of a dual color mold product? It is recommended not to use it because the shell of the dual color mold product uses the same material for injection molding and melting temperature. The second injection of the product can easily melt the first injection, causing color defects in the product.
   Total:6  Total pages:1 | Current page:1  9The first page   7Previous   Next8   The last page:  Jump: