There are ten, hundreds and thousands of people in the Injection mold construction factory. Some environments are good, some environments are normal, and some environments are poor. Will harsh environments affect product quality? The answer is certain. The author starts from the mold room of the Injection mold construction factory. If the molds and other equipment in the mold room are placed neatly, there is no oil on the ground or desktop, and everyone is working in an orderly manner, then from the perspective of the injection molding workshop, the injection molding machine is placed neatly, the exhaust equipment is complete, the workshop is well ventilated, and there is no small amount of debris such as oil on the ground. The equipment is improved, and the injection molding department personnel operate safely according to the rules. Rules. The wiring inside the mechanical equipment is neat and not exposed. The oil spray screen printing section has good ventilation facilities. The personnel in this section undergo regular physical examinations every month and strictly follow high-risk work operations. Chemical substances should be placed in designated locations and neatly arranged. It will be handled by a dedicated person, and merged by a dedicated person for local processing.
　　Although the above operations seem simple, they are not important, but they are very important for the products produced by Injection mold construction factories. Injection mold construction has become a widely used material in various fields. The mold has always served the market with its reputation. Its quality is primarily reflected in six aspects. The following is a detailed and comprehensive introduction. Next, the number of job cycles that the mold can complete or the number of parts produced.
　　All front and rear internal moulds, inserts, rows, skewed tops, straight tops (push blocks), etc. must be machined on the bottom or side of the waist pits and engraved with data title and hardness. Maintenance cost, cycle time, etc. Product quality: product scale stability, compliance, product surface finish, product data utilization, etc. Before packaging the mold, it is necessary to spray the internal mold with white/or colorless anti-rust agent. Injection molds are not only of high quality, but also longer than other molds, which can not only save more customer costs, but also bring accurate user experience, thereby saving you trouble, work and professional safety guarantee.